The gap under the door threshold has not been measured yet — the sheet is using a
1 inch assumption. Measure it on site and type it into the panel; every height
on the drawing moves with it.
Cut list
These lengths assume a 1 inch gap under the threshold, which has not been
measured yet. Confirm it before you cut.
Seal every cut end with green copper preservative. Factory ends are treated;
your cuts are not.
Cut plan
Shopping list
Lumber quantities include a 15% waste allowance and are rounded up to whole
8 ft boards. All lumber pressure-treated, ground-contact rated; all
connectors ZMAX or hot-dip galvanized.